Taco 1630E 1600 Series Cast Iron Centrifugal Pump 1/2HP 1PH

Move residential and commercial hydronic water with Taco 1630E 1/2 HP single-phase centrifugal pump. Its 115 or 230-volt motor drives a 2-inch flanged arrangement and provides up to 110 GPM with 32 feet of head. The 58-pound dry weight affects handling and support planning. Confirm electrical current, piping fit, system curve, and service clearance before installation.

The 1630E uses a cast-iron pump assembly with a 1/2 HP NEMA 56 frame ODP motor configured for 115V or 230V service. Full-load current is listed as 7.4A or 3.7A, while the supplied hydraulic limits reach 110 GPM and 32 feet of head. Connection details beyond the 2-inch flange, impeller material, seal construction, RPM, pressure, and temperature are not stated, so verify the complete submittal.

Key Features & Benefits

• 1/2 HP Single-Phase Motor: Supports residential and commercial hydronic circulation.
• 115/230-Volt Service: Provides electrical flexibility after field voltage verification.
• 110 GPM Maximum Flow: Gives contractors a stated capacity reference for system selection.
• 32 Feet Maximum Head: Helps compare system resistance and elevation requirements.
• 2-Inch Flange: Supports replacement planning when the piping interface matches.
• 7.4A/3.7A Full-Load Current: Assists circuit and disconnect review.
• 58-Pound Dry Weight: Helps plan lifting and pipe support.

Why Choose Taco 1630E

The Taco 1630E combines a 1/2 HP dual-voltage motor with a 2-inch flange and published circulation capacity. It suits residential and commercial hydronic systems where single-phase service and larger water volume are required.

• Build: The cast-iron assembly and NEMA 56 frame ODP motor define the supplied pump package.
• Value: Dual-voltage service can simplify replacement planning across different facilities.
• Audience: Fits HVAC contractors, boiler technicians, residential service teams, and commercial maintenance departments.

Applications & Use Cases

Use this pump in residential and commercial hydronic systems within the listed 110 GPM and 32-foot limits. Check the 2-inch flange, pipe supports, valve clearance, electrical current, and 58-pound handling requirement. Connection dimensions, pressure, temperature, overall dimensions, and seal details are not supplied, so verify them before purchase.

Warranty & Support

• Warranty Terms: Warranty duration, coverage, exclusions, and registration requirements require confirmation from the authorized seller.
• Service Requirements: Confirm whether authorized service is required for warranty claims.
• Model Verification: Match Taco 1630E, 1/2 HP, single-phase configuration, and SKU 1630E-1 to the seller’s order documentation.

Verify 115 or 230-volt service, align the 2-inch flange, purge air, inspect strainers, and support the 58-pound assembly during startup. Compare the running point with the actual system curve. Get the Taco 1630E single-phase centrifugal pump at Mulmotor.com for authentic equipment, applicable warranty protection, and technical pump support.