Taco 1619E3E3 1600 Series In-Line Centrifugal Pump 1.5HP 3PH

Handle industrial HVAC distribution with Taco 1619E3E3 1-1/2 HP three-phase in-line centrifugal pump. The supplied data lists 208–230/460-volt service, 4.8A or 2.4A current, 145 GPM maximum flow, and 58 feet of head. Taco’s current 1600 Series page lists the 1619 family at 9–97 GPM and 21–67 feet, so the exact performance curve must be confirmed before publication or purchase.

The 1619E3E3 is identified as a cast-iron 1600 Series pump with a high-efficiency NEMA 56 frame motor. The supplied 145 GPM value conflicts with Taco’s published 1619 family range, although the supplied 58-foot head falls within that family range. Do not treat 145 GPM as verified model performance until the nameplate, trim, and Taco curve agree.

Key Features & Benefits

• 1-1/2 HP Motor: Supports industrial HVAC distribution and larger hydronic circuits.
• Three-Phase Service: Accepts 208–230 or 460-volt power after field verification.
• 4.8A/2.4A Current: Assists motor-circuit review at the listed voltage points.
• High-Efficiency NEMA 56 Frame: Provides the supplied motor-interface reference.
• 145 GPM Listed Data: Requires verification because it exceeds Taco’s published 1619 family flow range.
• 58 Feet Listed Head: Must be checked against the exact impeller trim and performance curve.

Why Choose Taco 1619E3E3 Three-Phase

This pump may suit industrial HVAC distribution, but its supplied flow rating requires reconciliation with Taco’s current 1619 family data. Curve and nameplate verification should happen before electrical or piping work is scheduled.

• Build: The supplied data identifies a cast-iron high-efficiency NEMA-frame assembly.
• Value: Resolving the performance conflict can prevent oversizing and commissioning problems.
• Audience: Fits industrial HVAC contractors, facility engineers, plant operators, and commercial maintenance teams.

Applications & Use Cases

Consider this pump for industrial HVAC distribution only after the 145 GPM rating is confirmed against the exact Taco curve. Check connections, pipe supports, valve clearance, phase rotation, overload protection, and available service space. Do not select the pump by the supplied flow value alone.

Warranty & Support

• Warranty Terms: Taco commercial pump warranty coverage requires confirmation under the current terms for this model and motor configuration.
• Coverage Review: Confirm duration, date-code requirements, exclusions, seal coverage, and claim procedures before purchase.
• Model Verification: Match Taco 1619E3E3, 1-1/2 HP, three-phase configuration, and SKU 1619E3E3-1.5-3 to Taco documentation.

Verify voltage, phase rotation, motor protection, exact impeller trim, and pump curve before commissioning. Align the piping, purge air, inspect strainers, and check for leaks during startup. Order the Taco 1619E3E3 three-phase in-line centrifugal pump from Mulmotor.com for authentic equipment, applicable warranty protection, and technical pump support.