Taco 1619C3E3 1600 In-Line Centrifugal Pump 2HP 1PH

Handle high-head closed-loop HVAC service with Taco 1619C3E3 2 HP single-phase in-line centrifugal pump. The supplied data lists 115/230-volt service, 19.6A or 9.8A current, 160 GPM flow, and 62 feet of head. Taco’s current 1619 family data lists a lower 9–97 GPM range, so the supplied performance values require exact model and impeller-curve verification before installation.

The 1619C3E3 uses a cast-iron bronze-fitted body, full-diameter cast-bronze impeller, and 1,725 RPM single-phase motor according to the supplied data. Its 65-foot shut-off head is a zero-flow reference, not a normal operating point. The supplied 2-inch flange and 82-pound dry weight affect installation planning, but seal, pressure, temperature, and complete dimensions are not stated.

Key Features & Benefits

• 2 HP Motor: Supports high-head closed-loop HVAC circulation if the verified curve matches.
• 115/230-Volt Service: Provides single-phase flexibility after field verification.
• 19.6A/9.8A Current: Assists circuit and disconnect planning.
• 160 GPM Listed Flow: Requires confirmation because it exceeds Taco’s published 1619 family range.
• 62 Feet Listed Head: Must be matched to the exact impeller trim and curve.
• 2-Inch Flange: Supports replacement planning when the connection matches.
• 82-Pound Dry Weight: Helps plan handling and pipe support.

Why Choose Taco 1619C3E3

This Taco configuration offers a larger single-phase motor for high-head HVAC circulation. Its supplied 160 GPM rating must be reconciled with current Taco 1619 family information before publication or purchase.

• Build: Cast iron, bronze-fitted construction, and full-diameter impeller define the supplied package.
• Value: Curve verification can prevent oversizing and commissioning problems.
• Audience: Fits HVAC contractors, boiler technicians, facility engineers, and commercial plant operators.

Applications & Use Cases

Consider this pump for high-head closed-loop HVAC only after the 160 GPM rating is confirmed. Check the 2-inch flange, pipe supports, valve clearance, motor access, phase protection, and 82-pound handling requirement. Do not select the pump by the supplied flow value alone.

Warranty & Support

• Warranty Terms: Taco warranty duration and coverage for this 1600 Series configuration require confirmation under current commercial terms.
• Coverage Review: Confirm date-code requirements, seal exclusions, electrical conditions, and claim procedures before purchase.
• Model Verification: Match Taco 1619C3E3, 2 HP, single-phase configuration, and SKU 1619C3E3 to the seller’s order.

Verify the exact curve, voltage, current, impeller, and motor protection before wiring. Align the piping, purge air, inspect strainers, and check for leaks during startup. Purchase the Taco 1619C3E3 single-phase in-line centrifugal pump at Mulmotor.com for genuine equipment, applicable warranty coverage, and pump support.