Taco 1616D Stainless Steel In-Line Centrifugal Pump 1HP 3PH 2″ Flange
Description
Taco 1616D Stainless Steel 1HP 3PH 2″ Flange
The Taco 1616D 1HP 3PH combines high-horsepower mechanical output with a 2-inch flanged stainless steel volute. Mechanically, it is optimized for high-volume open-loop systems where water purity and sanitation are critical. The internal geometry is designed for high-velocity fluid displacement, featuring a stainless steel shaft sleeve and a precision-ground mechanical seal. This model represents the mechanical standard for industrial laundry and laboratory facilities requiring 24/7 water circulation with maximum structural redundancy and resistance to aggressive potable water chemistry.
Featuring a 1HP three-phase motor, this model offers exceptional electrical efficiency and balanced power across 208-230/460V lines. The absence of starting capacitors in the 3-phase drive reduces potential failure points and provides a smoother ramp-up to operating speed. This stable electrical configuration minimizes vibration harmonics, protecting the internal ceramic shaft and high-load bearings, resulting in the highest reliability rating for the 1600 series in industrial environments.
Key Features of Taco 1616D
- Industrial 3-Phase electrical for maximum reliability
- Large 2 inch flanged stainless steel volute
- Powerful 1HP motor for high-capacity performance
- Superior electrical efficiency for continuous duty
- Durable stainless steel shaft sleeve and seal
- Back pull-out design for rapid field service
- Maximum working pressure: 175 PSI
Taco 1616D Stainless Steel Pump 1HP 3PH Specs
| Technical Parameter | Official Specification |
|---|---|
| Brand & Series | Taco Comfort Solutions - 1600 Series |
| Model Number/SKU | 1616D (Stainless Steel) |
| Country of Origin | USA |
| Pump Type | In-Line Centrifugal Pump |
| Horsepower (HP) | 1 HP |
| Voltage (V) & Phase (PH) | 208-230/460V / 3 PH / 60Hz |
| Amperage (FLA) | 3.6A / 1.8A |
| Motor RPM | 1725 RPM |
| Motor Type | NEMA 56 Frame / ODP High Efficiency |
| Connection Type | 2-Bolt Flange |
| Connection Size (Inches) | 2" |
| Body Material (Casing) | Stainless Steel (NSF Certified) |
| Impeller Material | One-Piece Cast Bronze |
| Shaft Material | Alloy Steel w/ Cupro-Nickel Sleeve |
| Mechanical Seal Type | Ceramic Face / EPT Elastomer |
| Max Flow Rate (GPM) | 150 GPM |
| Max Head (Feet) | 50 Feet |
| Max Operating Pressure (PSI) | 175 PSI |
| Max Fluid Temperature (°F/°C) | 250°F (121°C) |
| Min Fluid Temperature (°F/°C) | 40°F (4°C) |
| Drive Type | Close-Coupled |
| Bearing Type | Sealed Ball Bearings (Maintenance-Free) |
| Flange-to-Flange Length | 12 Inches |
| Shut-off Head | 52 Feet |
| Thermal Protection | External Overload Required |
| Service Factor | 1.15 |
| Dry Weight (lbs/kg) | 62 lbs (28.1 kg) |
| Application Suitability | Industrial Potable Water Systems |
| Compliance | NSF/ANSI 372 / UL / CSA |
| SEO Usage Profile | High-Capacity Potable Water Systems |
You must be logged in to post a review.
Reviews
There are no reviews yet.