Shipco 80LP Shipco Steel Condensate 8 Gallon Pump With 1/3 HP

Description

Collect condensate in tight mechanical spaces with Shipco 80LP, an 8-gallon low-profile steel condensate pump package using a 1/3 HP motor. Its ultra-low inlet height is intended for gravity floor drains and under-radiator returns where a taller receiver will not fit. The 3500 RPM motor suits the listed compact package, but confirm voltage, phase, flow, head, and connection details before installation.

The steel receiver stores condensate while the pump transfers collected water through the connected return system. A high-temperature mechanical seal is included in the supplied data, but motor electrical details, pump curve, discharge size, dimensions, weight, and control features were not stated. Verify floor-drain elevation, receiver access, service clearance, and the complete wiring diagram before commissioning.

Key Features & Benefits

• 8-Gallon Steel Receiver: Provides condensate storage for compact boiler-room and mechanical-closet installations.
• 1/3 HP Motor: Supports the specified condensate-transfer package configuration.
• 3500 RPM Speed: Identifies the listed high-speed motor arrangement for equipment matching.
• Ultra-Low Inlet Height: Fits gravity floor drains and under-radiator return layouts.
• High-Temperature Mechanical Seal: Helps contain hot condensate around the pump shaft.
• Low-Profile Package: Helps conserve vertical clearance in small mechanical closets.
• Shipco Type LP: Provides a clear equipment-family reference for condensate-return replacement work.

Why Choose Shipco 80LP 8-Gallon

The 80LP is built around low inlet height and compact condensate collection. It suits locations where gravity drainage and available vertical space limit the choice of receiver package.

• Build: Steel receiver, low-profile layout, 1/3 HP motor, and high-temperature seal define the supplied package.
• Value: The low inlet arrangement can simplify condensate collection where a standard-height receiver would not fit.
• Audience: Intended for boiler contractors, steam-system technicians, mechanical-room installers, and facility maintenance teams.

Applications & Use Cases

Use Shipco 80LP for under-radiator condensate return, small mechanical closets, gravity floor drains, and compatible boiler condensate systems. The supplied data identifies an 8-gallon steel receiver and ultra-low inlet but does not provide overall dimensions, weight, discharge connection, or pump curve. Verify floor elevation, service access, venting, and pipe routing before installation.

Warranty & Support

• Warranty Terms Require Confirmation: Verify duration, coverage, registration, exclusions, and authorized service requirements with Shipco or the seller.
• Confirm the 80LP model, 8-gallon receiver, 1/3 HP motor, 3500 RPM speed, and seal configuration before ordering.

Clean the receiver, inspect the inlet, confirm the pump is free of debris, and verify the condensate return piping before startup. Test the float or control sequence if included with the package, then monitor discharge, cycling, leakage, and vibration. Purchase the Shipco 80LP low-profile 8-gallon condensate pump through Mulmotor.com for authentic equipment, applicable warranty support, and boiler-system assistance.