Domestic Pump 650PF-C17 Domestic Pump Centriflo 3/4HP 3PH 1750 RPM
Plumbers spec the Domestic 650PF-C17-0.75HP-3PH for quiet secondary condensate return, utilizing a 3/4 HP three-phase motor to feed small boiler systems.
- 0.75 HP motor reduces energy consumption
- 1750 RPM speed lowers mechanical wear
- PF flange mount design saves mechanical space
Description
Move high-head potable water with Bell & Gossett 172954LF B627S, a Series 60 All-Bronze pump listed with a 1-1/2 HP single-phase motor. Its lead-free bronze body, NSF-372 certification, and 1-1/2-inch by 1-1/2-inch by 7-inch configuration suit multi-story domestic hot-water loops where material selection and system pressure must be checked together. Confirm flow, head, voltage, and flange alignment before installation.
The pump uses a 7-inch bronze impeller within the Series 60 All-Bronze assembly. The supplied data does not state voltage, amp draw, flow, head, pressure, dimensions, weight, or seal material, so horsepower alone should not determine selection. Verify the domestic-water temperature, pump curve, connection geometry, and service clearance before startup.
Key Features & Benefits
- 1-1/2 HP Motor: Supports high-head potable-water boosting in larger domestic hot-water systems.
- Single-Phase Operation: Fits compatible building service where three-phase power is not available.
- All-Bronze Construction: Provides the specified wetted material for potable-water circulation.
- NSF-372 Certification: Supports the listed low-lead requirement for drinking-water applications.
- 7-Inch Bronze Impeller: Identifies the full-size rotating component for replacement matching.
- 1-1/2-Inch by 1-1/2-Inch Connections: Helps contractors verify piping compatibility before installation.
- Series 60 Design: Provides a defined product family for high-head DHW system comparison.
Why Choose Bell & Gossett 172954LF B627S
The B627S combines a large Series 60 impeller with All-Bronze construction and potable-water certification for multi-story DHW systems that require careful material and hydraulic matching.
- Build: Lead-free bronze body, bronze impeller, and Series 60 construction define the supplied pump arrangement.
- Value: The All-Bronze configuration and stated certification help contractors review potable-water compatibility before purchase.
- Audience: Suited to plumbing contractors, hotel engineers, apartment maintenance teams, and commercial DHW specialists.
Applications & Use Cases
Use Bell & Gossett 172954LF B627S for high-head potable boosting, multi-story domestic hot-water loops, and compatible 1-1/2-inch piping. The supplied pump size is 1-1/2 inches by 1-1/2 inches by 7 inches, but overall weight, port reach, flow, and head were not provided. Verify clearance, pipe support, and service access before installation.
Warranty & Support
- 3-Year Limited Warranty: Series 60 maintenance-free pump coverage should be confirmed against the current manufacturer terms.
- Match SKU 172954LF, model B627S, horsepower, voltage, pump size, impeller, and NSF-372 requirements before ordering.
Flush the potable-water loop, purge air, inspect the impeller and seal areas, and verify the motor nameplate before startup. Monitor flow, vibration, leakage, and water temperature during commissioning. Purchase the Bell & Gossett 172954LF B627S Series 60 All-Bronze potable-water pump through Mulmotor.com for authentic equipment, applicable warranty support, and pump assistance.
Domestic 650PF-C17 Series C17 (3/4 HP 3PH) Specs
| Technical Parameter | Official Specification (Verified) |
|---|---|
| Brand & Model | Domestic Series C17 Centriflo |
| Horsepower (HP) | 3/4 HP |
| Speed (RPM) | 1750 RPM (4-Pole Low Speed) |
| Electrical Phase | Three-Phase (3-PH) |
| Case Style | PF (Flange Mount / Close-Coupled) |
| Application Information | Quiet Secondary Condensate Return; Small Boiler Feed |












Reviews
There are no reviews yet.