Bell & Gossett Series e-1532 1.5BC 3HP 1750 RPM 3PH ODP Pump

Description

Bell & Gossett Series e-1532 1.5BC 3 HP provides steady commercial HVAC circulation through a close-coupled footless arrangement. The 2-1/2-inch suction and 1-1/2-inch discharge connections suit general HVAC pumping and higher-capacity hydronic systems, while the 1750 RPM three-phase motor offers a defined low-speed operating reference. Confirm electrical data, support requirements, and the approved pump curve before installation.

The pump uses an ODP motor and footless construction, so connected piping must provide proper support and alignment. The supplied data does not state flow, head, pressure, amp draw, impeller diameter, dimensions, weight, or seal material. Verify the 1.5BC case, flange arrangement, motor rotation, suction conditions, and service clearance before startup.

Key Features & Benefits

• 3 HP Motor: Supports general HVAC pumping and larger hydronic circulation duties.
• 1750 RPM Speed: Provides a four-pole reference for steady commercial operation.
• Three-Phase Power: Fits compatible commercial electrical systems with verified phase rotation.
• 2-1/2-Inch Suction: Accommodates the larger inlet connection specified for the 1.5BC case.
• 1-1/2-Inch Discharge: Defines the outlet size for compatible HVAC piping.
• ODP Enclosure: Identifies the open drip proof motor style for suitable equipment placement.
• Close-Coupled Footless Design: Requires proper pipe support and alignment within the installation.
• Series e-1532 Platform: Provides a defined product family for commercial HVAC replacement.
• 1.5BC Case Size: Helps contractors compare the pump with existing system documentation.

Why Choose Bell & Gossett Series e-1532 1.5BC 3 HP

The 1.5BC configuration combines 3 HP power, 1750 RPM operation, and large suction and discharge connections for general HVAC pumping where pipe support is properly planned.

• Build: Footless close-coupled construction, ODP motor, and 1.5BC case define the supplied equipment layout.
• Value: A footless design can reduce separate base hardware when the connected piping is properly supported.
• Audience: Intended for commercial HVAC contractors, facility engineers, boiler technicians, and hydronic maintenance teams.

Applications & Use Cases

Use Bell & Gossett Series e-1532 1.5BC 3 HP for general HVAC pumping, secondary hydronic circulation, boiler branches, and compatible commercial systems. The supplied data identifies 2-1/2-inch suction and 1-1/2-inch discharge connections but does not list dimensions, weight, port reach, or base details. Verify pipe support, lifting access, and service clearance before installation.

Warranty & Support

• Warranty Terms Require Confirmation: Verify duration, coverage, registration, exclusions, and authorized service requirements with the seller.
• Confirm the 1.5BC case, 3 HP motor, 1750 RPM speed, ODP enclosure, three-phase power, and connection sizes before ordering.

Inspect the suction and discharge piping, support the footless assembly, verify phase rotation, prime the pump, and purge air before startup. Monitor pressure, vibration, leakage, and bearing temperature during commissioning. Purchase the Bell & Gossett Series e-1532 1.5BC 3 HP footless HVAC pump through Mulmotor.com for authentic equipment, applicable warranty support, and pump assistance.