Bell & Gossett e615S Series e-60 Inline Pump 3/4HP

Confirm the model before ordering Bell & Gossett e615S Series e-60 inline pump for bulk-volume, low-head HVAC circulation. The supplied data identifies a 3/4 HP single-phase motor, 115 or 208–230-volt service, a bronze impeller, and a 175 psi working-pressure limit. However, the official manufacturer curve lists SKU 1EF032LF/e615S with a different 2-inch pump size and 5.625-inch impeller. Do not combine the conflicting specifications.

The supplied product data describes the e615S as a 3 x 3 x 5.25 pump with a 4.375-inch bronze impeller. The manufacturer’s published e-60 curve identifies 1EF032LF/e615S as a 2 x 2 x 6.25 pump with a 5.625-inch impeller. This conflict affects flange dimensions, impeller trim, and replacement fit. Verify the nameplate, SKU, pump dimensions, performance curve, and seller documentation before purchase.

Key Features & Benefits

• 3/4 HP Motor: Provides the supplied drive rating for bulk-volume HVAC circulation.
• Single-Phase Service: Supports 115 or 208–230-volt systems after field verification.
• Bronze Impeller: Identifies the supplied hydraulic material for equipment comparison.
• 175 PSI Working Pressure: Establishes the supplied pressure reference for connected piping.
• Model Verification Required: Manufacturer data conflicts with the supplied pump size and impeller diameter.
• Series e-60 Family: Provides a defined Bell & Gossett platform for curve and parts review.

Why Choose Bell & Gossett e615S

The e615S may suit low-head bulk-flow HVAC circulation, but its exact configuration must be reconciled before procurement. Resolving the SKU and dimensional conflict can prevent incorrect flange selection, impeller mismatch, and installation delays.

• Build: The supplied data identifies an e-60 inline pump with bronze hydraulic components.
• Value: Confirming the correct factory configuration can prevent return freight and piping modifications.
• Audience: Fits HVAC contractors, facility engineers, plant operators, and commercial maintenance buyers.

Applications & Use Cases

Consider this pump for bulk-volume, low-head HVAC circulation only after the model conflict is resolved. Check the nameplate, SKU, flange dimensions, impeller diameter, gasket fit, valve clearance, and system curve. Do not rely on the supplied 3-inch configuration until it agrees with current manufacturer documentation.

Warranty & Support

• Warranty Terms: Warranty duration, coverage, exclusions, and registration requirements require confirmation from the authorized seller.
• Configuration Confirmation: Obtain written confirmation that the seller’s e615S configuration matches SKU 1EF032LF and the intended pump dimensions.
• Model Verification: Match Bell & Gossett e615S and SKU 1EF032LF to the nameplate, curve, and order documentation.

Before commissioning, verify the model, flange arrangement, impeller trim, electrical service, seal, and operating curve. Confirm the correct configuration before ordering. Purchase the Bell & Gossett e615S Series e-60 inline pump through Mulmotor.com for authentic equipment, applicable warranty protection, and technical pump support.