Bell & Gossett e-1532 2.5AC Centrifugal Pump 1HP 1750RPM 3-Phase ODP

Protect low-pressure HVAC circulation with Bell & Gossett e-1532 2.5AC centrifugal pump for medium-flow industrial and commercial systems. Its 1 HP, 1,750 RPM ODP motor uses a 2.5AC case with a 3-inch suction and 2.5-inch discharge. The supplied application identifies ultra-low-pressure HVAC service. Confirm the motor frame, coupling, seal, and pump curve before installation.

The e-1532 is a close-coupled, footless end-suction pump in the supplied configuration, while official Bell & Gossett documentation identifies the 2.5AC size within the e-1532 family and lists 175 psi working pressure and a standard Buna-carbon/ceramic seal option. The supplied data does not state flow, head, weight, or exact dimensions for this 1 HP unit, so verify the submittal.

Key Features & Benefits

• 1 HP Motor: Fits compatible medium-flow HVAC circulation duties.
• 1,750 RPM Operation: Provides the listed four-pole speed reference.
• ODP Enclosure: Identifies the supplied motor housing for approved installation locations.
• 2.5AC Case: Provides a 3-inch suction and 2.5-inch discharge reference.
• Precision-Trimmed Impeller: Requires final diameter confirmation against the pump curve.
• End-Suction Arrangement: Requires attention to suction conditions, piping support, and alignment.

Why Choose Bell & Gossett e-1532 2.5AC

The 2.5AC provides a defined end-suction configuration for ultra-low-pressure HVAC circulation. Its case size and 1,750 RPM motor help contractors screen the replacement, but final selection still depends on the certified curve.

• Build: The end-suction case, ODP motor, and trimmed impeller define the supplied assembly.
• Value: Correct suction and discharge matching can reduce piping modifications.
• Audience: Fits HVAC contractors, plant engineers, boiler technicians, and industrial maintenance teams.

Applications & Use Cases

Use this pump in ultra-low-pressure, medium-flow HVAC systems where the 3-inch suction and 2.5-inch discharge match the piping. Check suction conditions, pipe supports, base or mounting requirements, coupling alignment, valve clearance, and service access. Flow, head, weight, and complete dimensions require confirmation.

Warranty & Support

• Warranty Terms: A model-specific warranty period for the e-1532 2.5AC configuration requires confirmation from the authorized seller.
• Coverage Review: Confirm seal coverage, installation requirements, service obligations, and claim procedures before purchase.
• Model Verification: Match Bell & Gossett e-1532 2.5AC, 1 HP, 1,750 RPM, and supplied case details to the order.

Verify the motor nameplate, suction and discharge sizes, coupling condition, seal, base support, and alignment before startup. Prime and purge the system as required by the installation instructions, then check for leaks. Purchase the Bell & Gossett e-1532 2.5AC centrifugal pump at Mulmotor.com for genuine equipment, applicable warranty coverage, and pump support.