Bell & Gossett e-1510 1.5AD Pump 5 HP 3550 RPM 3 Phase TEFC

Description

High-head HVAC systems use Bell & Gossett e-1510 1.5AD to move water through demanding commercial loops and industrial washdown areas. This 5 HP base-mounted centrifugal pump operates at 3550 RPM with a TEFC motor, giving contractors a high-speed configuration for applications that require pressure at the selected duty point. Prime the pump as required, size the suction line to limit inlet loss, and verify three-phase motor data before startup to reduce cavitation and overload risk.

The 1.5AD case uses a 2-inch suction connection and 1.5-inch discharge connection, while the two-pole motor drives the hydraulic assembly at 3550 RPM. TEFC construction helps protect the motor in dusty or wet service areas, and the IP55 rating provides resistance to dust and jet-water exposure. Verified data does not include voltage, phase, amp draw, GPM, maximum head, impeller material, seal type, operating temperature, dimensions, weight, thermal protection, or self-priming capability, so final selection must follow the pump curve.

Key Features of Bell & Gossett e-1510 1.5AD

• 5 HP high-head HVAC pump for commercial circulation and industrial water service.
• 3550 RPM two-pole motor configuration supports high-speed hydraulic operation.
• TEFC motor enclosure helps protect internal components from dust and moisture.
• Base-mounted construction supports fixed mechanical-room installation and shaft alignment.
• 2-inch suction and 1.5-inch discharge connections match the 1.5AD case.
• IP55 protection resists dust and jet-water exposure in compatible environments.
• Three-phase motor configuration requires verified voltage, phase rotation, and overload settings.
• GPM, maximum head, amp draw, impeller, seal, dimensions, weight, thermal protection, and warranty terms were not supplied.

Why the Bell & Gossett e-1510 1.5AD Stands Out

This Bell & Gossett high-head HVAC pump combines a 5 HP drive, high-speed operation, TEFC protection, and a base-mounted layout for commercial water circulation.

• Build: TEFC and IP55 motor protection support dusty or wet industrial rooms, while the base-mounted frame helps maintain pump and motor alignment.
• Value: Correct curve matching can reduce cavitation, motor overload, seal wear, and emergency service work in high-head HVAC systems.
• Audience: Commercial HVAC contractors, industrial pump installers, facility engineers, washdown-area maintenance teams, and hydronic system designers can specify this model when the hydraulic demand matches.

Applications & Use Cases

Use the Bell & Gossett e-1510 1.5AD for high-head HVAC loops, industrial water transfer, washdown-area circulation, chilled-water systems, and commercial hydronic service. Physical dimensions, unit weight, and port reach were not included, so verify base clearance, suction approach, discharge alignment, valve spacing, motor access, and lifting requirements before installation.

Warranty & Support

• Factory warranty terms were not included in the supplied product data. Confirm warranty coverage, motor requirements, registration steps, and authorized service support before purchase.
• Check phase rotation, motor current, suction conditions, piping support, and seal condition during commissioning.

Prime the pump as required, flush debris from the suction line, inspect the mechanical seal for leakage, and review motor protection during scheduled service. Purchase the Bell & Gossett e-1510 1.5AD high-head HVAC pump from [store domain] for authentic equipment, applicable factory warranty protection, and pump support.