Bell & Gossett Be614S Series e-60 Bronze Inline Pump 1HP

Move commercial potable water through large DHW loops with Bell & Gossett Be614S Series e-60 bronze inline pump. Its 1 HP single-phase motor accepts 115 or 208–230 volts, while the all-bronze body, 2-inch flanged arrangement, and 5.25-inch full-diameter impeller support larger water systems. Confirm the system curve, flange dimensions, voltage, and water compatibility before installation.

The Be614S uses an all-bronze Series e-60 body with a 5.25-inch full-diameter bronze impeller and single-phase motor. Its 2 x 2 x 5.25 pump size identifies the 2-inch flanged configuration, while the listed voltage range requires field verification. The supplied application covers potable-water boosting and large-scale DHW. Flow, head, RPM, seal materials, dimensions, weight, pressure, and temperature are not stated.

Key Features & Benefits

• 1 HP Motor: Supports large-scale potable-water and domestic hot-water circulation.
• Single-Phase Voltage: Accepts 115 or 208–230-volt service after field checks.
• All-Bronze Construction: Provides the specified material for potable-water service.
• 2-Inch Flanged Connections: Help match the pump to larger water-system piping.
• 5.25-Inch Bronze Impeller: Provides a defined full-diameter hydraulic component.
• Series e-60 Design: Targets large-scale DHW and potable-water booster applications.
• 2 x 2 x 5.25 Pump Size: Gives contractors a specific replacement reference.

Why Choose Bell & Gossett Be614S

The Be614S combines an all-bronze e-60 package with a 2-inch flange and single-phase electrical flexibility. It suits larger potable-water systems where material compatibility and water volume guide pump selection.

• Build: All-bronze construction and full-diameter bronze impeller define the supplied assembly.
• Value: Matching the larger flange can reduce piping modifications during replacement.
• Audience: Fits plumbing contractors, hotel maintenance teams, facility engineers, and commercial DHW specialists.

Applications & Use Cases

Use this pump for one-phase potable-water boosting and large-scale domestic hot-water systems that match the listed 2-inch configuration. Check the 2 x 2 x 5.25 dimensions, gasket fit, pipe supports, valve clearance, motor access, and electrical service. Flow, head, overall dimensions, weight, pressure, and temperature are not supplied, so verify the submittal.

Warranty & Support

• Warranty Terms: Warranty duration, coverage, exclusions, and registration requirements require confirmation from the authorized seller.
• Service Requirements: Confirm whether authorized service is required for warranty claims.
• Model Verification: Match Bell & Gossett Be614S and SKU 1EF076LF to the seller’s order documentation.

Verify voltage, isolate the water line, align the 2-inch flanges, purge air, inspect strainers, and check for leaks during startup. Confirm potable-water requirements and select the pump from the actual system curve. Purchase the Bell & Gossett Be614S Series e-60 bronze inline pump at Mulmotor.com for genuine equipment, applicable warranty coverage, and pump support.