Bell & Gossett Be612T Series e-60 Bronze Inline Pump 1HP

Move institutional hot water with Bell & Gossett Be612T Series e-60 bronze inline pump for three-phase potable-water boosting. Its 1 HP motor accepts 208–230 or 460 volts, while the all-bronze body, 1-1/2-inch flanged arrangement, and 5.25-inch full-diameter bronze impeller support large DHW systems. The 175 psi maximum working pressure sets a clear limit. Confirm phase rotation and the system curve before installation.

The Be612T uses an all-bronze Series e-60 body with a 5.25-inch full-diameter bronze impeller and three-phase motor. Its 1.5 x 1.5 x 5.25 pump size identifies the 1-1/2-inch flanged arrangement, while the motor accepts 208–230 or 460 volts. The supplied application covers potable high-head boosting and institutional DHW. Flow, head, RPM, seal materials, dimensions, weight, and temperature are not stated.

Key Features & Benefits

• 1 HP Three-Phase Motor: Supports institutional potable-water boosting and DHW circulation.
• 208–230/460-Volt Service: Matches commercial power after voltage and phase checks.
• All-Bronze Construction: Provides the specified material for potable-water service.
• 1-1/2-Inch Flanged Connections: Help match the pump to larger piping.
• 5.25-Inch Bronze Impeller: Provides a defined full-diameter hydraulic component.
• 175 PSI Maximum Working Pressure: Establishes a stated limit for connected components.
• Series e-60 Design: Targets high-head institutional domestic-water systems.

Why Choose Bell & Gossett Be612T

The Be612T combines all-bronze construction with a full-diameter impeller, three-phase power, and a 1-1/2-inch flange. It suits institutional DHW systems where material compatibility and high-head circulation guide selection.

• Build: Bronze construction and the Series e-60 arrangement define the supplied pump package.
• Value: Matching the existing piping and electrical service can reduce retrofit work.
• Audience: Fits hospital engineers, hotel maintenance teams, plumbing contractors, and water-system technicians.

Applications & Use Cases

Use this pump in three-phase potable-water boosting and institutional DHW systems that meet the listed pressure limit. Check the 1.5 x 1.5 x 5.25 arrangement, gasket fit, pipe supports, valve clearance, motor access, and phase rotation. Flow, head, dimensions, weight, and temperature are not supplied, so verify the submittal.

Warranty & Support

• Warranty Terms: Warranty duration, coverage, exclusions, and registration requirements require confirmation from the authorized seller.
• Service Requirements: Confirm whether authorized service is required for warranty claims.
• Model Verification: Match Bell & Gossett Be612T and SKU 1EF057LF to the seller’s order documentation.

Verify phase and voltage, isolate the water line, align the flanges, purge air, inspect strainers, and check for leaks during startup. Review potable-water requirements and select from the actual pump curve. Purchase the Bell & Gossett Be612T Series e-60 bronze inline pump at Mulmotor.com for genuine equipment, applicable warranty coverage, and pump support.