Bell & Gossett Be610T Series e-60 Bronze Inline Pump 1/2HP

Circulate potable water through large commercial DHW systems with Bell & Gossett Be610T Series e-60 bronze inline pump. Its 1/2 HP three-phase motor accepts 208–230 or 460 volts, while the official e-60 data identifies a 2 x 2 x 5.25 configuration and 4.125-inch bronze impeller. The all-bronze body and NSF/ANSI-372 low-lead reference suit material-sensitive installations. Confirm the system curve and flange fit before ordering.

The Be610T uses an all-bronze Series e-60 arrangement with a 2-inch flanged connection, 1,750 RPM ODP motor, and standard EPR/carbon/ceramic seal. Official submittal data lists approximately 63 pounds for the three-phase Be610T configuration. Maximum working pressure is 175 psi. Verify actual dimensions, seal selection, flow, head, and temperature against the nameplate and current submittal.

Key Features & Benefits

• 1/2 HP Three-Phase Motor: Supports potable-water boosting and large commercial DHW circulation.
• 208–230/460-Volt Service: Matches common commercial power after voltage and phase checks.
• 2-Inch Flanged Connections: Help match the pump to existing water-system piping.
• 4.125-Inch Bronze Impeller: Provides the official hydraulic component reference for this model.
• All-Bronze Construction: Supports the listed potable-water application.
• NSF/ANSI-372 Reference: Provides a low-lead compliance point for procurement review.
• 175 PSI Working Pressure: Establishes the listed limit for connected system components.
• 63-Pound Approximate Weight: Helps plan handling and pipe support.

Why Choose Bell & Gossett Be610T

The Be610T combines official Series e-60 sizing with an all-bronze hydraulic package and three-phase power. It suits commercial potable-water systems where material selection and 2-inch piping must be confirmed together.

• Build: Bronze construction, ODP motor, and standard mechanical sealing define the supplied assembly.
• Value: Official sizing and weight data support more accurate replacement planning.
• Audience: Fits plumbing contractors, hospital engineers, hotel maintenance teams, and commercial DHW operators.

Applications & Use Cases

Use this pump in three-phase potable-water booster and large commercial DHW systems that match the verified e-60 configuration. Check the 2-inch flanges, gasket fit, pipe supports, valve clearance, motor access, phase rotation, and lifting path. Confirm flow and head from the actual pump curve.

Warranty & Support

• 3-Year Standard Series 60 Warranty: Bell & Gossett literature states 36-month coverage from date of manufacture for standard Series 60 pumps.
• Coverage Review: Confirm whether SKU 1EF055LF and this Be610T configuration qualify for standard coverage and review seal exclusions.
• Model Verification: Match Bell & Gossett Be610T and SKU 1EF055LF to the nameplate and order documentation.

Verify phase and voltage, align the flanges, purge air, inspect strainers, and check for leaks during startup. Confirm the official model data before commissioning. Purchase the Bell & Gossett Be610T Series e-60 bronze inline pump at Mulmotor.com for genuine equipment, applicable warranty coverage, and pump support.