Bell & Gossett Be605T Series e-60 Bronze Inline Pump 1/3HP

Use three-phase power for Bell & Gossett Be605T Series e-60 bronze inline pump in high-temperature potable-water and industrial DHW systems. Its 1/3 HP motor accepts 208–230 or 460 volts, while the supplied 1-1/4-inch flanged arrangement and 4.875-inch bronze impeller support compact commercial piping. The 250°F maximum operating temperature defines the stated service limit. Confirm the SKU and system curve before installation.

The supplied Be605T data identifies an all-bronze Series e-60 pump with a 1/3 HP three-phase motor and a 1.25 x 1.25 x 5.25 configuration. Its 208–230/460-volt service requires phase-rotation verification, while the 4.875-inch impeller provides a defined hydraulic reference. The supplied specifications do not state flow, head, RPM, seal, dimensions, weight, or working pressure.

Key Features & Benefits

• 1/3 HP Motor: Fits compatible high-temperature potable-water and industrial DHW circulation.
• Three-Phase Service: Accepts 208–230 or 460-volt power after field verification.
• 1-1/4-Inch Flanged Connections: Help match the pump to smaller commercial piping.
• All-Bronze Construction: Provides the supplied material for potable-water service review.
• 4.875-Inch Bronze Impeller: Identifies the hydraulic component for selection.
• 250°F Maximum Operating Temperature: Establishes the listed upper limit for compatible service.
• Series e-60 Design: Targets industrial DHW and high-temperature water applications.

Why Choose Bell & Gossett Be605T

The Be605T combines an all-bronze body with three-phase service and a compact 1-1/4-inch e-60 arrangement. It suits commercial water systems where temperature and material compatibility matter.

• Build: Bronze construction and the supplied e-60 flanged arrangement define the assembly.
• Value: Confirming temperature, flange, and electrical requirements can reduce replacement errors.
• Audience: Fits plumbing contractors, boiler technicians, facility engineers, and industrial DHW operators.

Applications & Use Cases

Use this pump in three-phase high-temperature potable-water and industrial DHW systems that match the 250°F limit. Check the 1-1/4-inch flange, gasket fit, water chemistry, valve clearance, pipe alignment, and phase rotation. Flow, head, dimensions, weight, and pressure are not supplied, so verify the submittal.

Warranty & Support

• 3-Year Standard Series e-60 Warranty: Bell & Gossett literature states 36-month coverage from date of manufacture for standard Series 60 configurations.
• Coverage Review: Confirm that SKU 1EF044LF and this Be605T configuration qualify for standard coverage before purchase.
• Model Verification: Match Bell & Gossett Be605T and SKU 1EF044LF to the nameplate and seller documentation.

Verify phase, voltage, temperature, and flange alignment, then purge air, inspect strainers, check the seal, and monitor for leaks during startup. Purchase the Bell & Gossett Be605T Series e-60 bronze inline pump at Mulmotor.com for genuine equipment, applicable warranty coverage, and pump support.