Bell & Gossett 614S Series 60 Centrifugal Pump

Move high-head commercial water with Bell & Gossett 614S Series 60 centrifugal pump for hydronic HVAC and booster service. Its 1 HP single-phase motor accepts 115 or 208–230 volts, while the 1-1/2-inch by 1-1/2-inch by 6-1/4-inch arrangement and 6-1/4-inch bronze impeller support larger loop piping. The carbon/ceramic mechanical seal provides a defined service detail. Confirm the system curve before installation.

The 614S uses a Series 60 arrangement with a 6-1/4-inch bronze impeller, single-phase motor, and standard Buna/carbon-ceramic mechanical seal. Its motor accepts 115 or 208–230 volts, requiring field verification before wiring. The supplied application covers high-head commercial boosting and hydronic HVAC. Flow, head, RPM, dimensions, weight, pressure, and temperature are not stated, so verify the complete selection before ordering.

Key Features & Benefits

• 1 HP Motor: Supports high-head commercial booster and hydronic HVAC service.
• Single-Phase Voltage: Accepts 115 or 208–230-volt service after field checks.
• 1-1/2-Inch Pump Size: Helps compare the supplied arrangement with existing piping.
• 6-1/4-Inch Bronze Impeller: Provides a defined hydraulic component for replacement review.
• Buna/Carbon-Ceramic Seal: Identifies the supplied mechanical seal materials.
• Series 60 Design: Targets high-head commercial circulation and HVAC service.

Why Choose Bell & Gossett 614S

The 614S combines a 1 HP single-phase motor with a 1-1/2-inch Series 60 arrangement and bronze impeller. It suits commercial systems where high-head circulation, connection size, and seal construction guide selection.

• Build: The bronze impeller, mechanical seal, and Series 60 layout define the supplied assembly.
• Value: Matching the existing piping and electrical service can reduce retrofit work.
• Audience: Fits HVAC contractors, boiler technicians, facility engineers, and commercial maintenance teams.

Applications & Use Cases

Use this pump in high-head commercial booster and hydronic HVAC systems that match the manufacturer’s curve. Check the 1-1/2-inch by 1-1/2-inch by 6-1/4-inch arrangement, gasket fit, pipe supports, valve clearance, motor access, and seal service space. Flow, head, dimensions, weight, pressure, and temperature are not supplied.

Warranty & Support

• Warranty Terms: Warranty duration, coverage, exclusions, and registration requirements require confirmation from the authorized seller.
• Service Requirements: Confirm whether authorized service is required for warranty claims.
• Model Verification: Match Bell & Gossett 614S and SKU 172670LF to the seller’s order documentation.

Verify voltage, align the piping, inspect the carbon/ceramic seal, purge air, clean strainers, and check for leaks during startup. Select the pump from the actual system curve. Order the Bell & Gossett 614S Series 60 centrifugal pump at Mulmotor.com for genuine equipment, applicable warranty coverage, and pump support.