Bell & Gossett 1EF031LF e613S Series e-60 Pump 3/4 HP

Description

Run a larger commercial loop with Bell & Gossett 1EF031LF e613S, a Series e-60 pump listed for 3/4 HP single-phase operation and 2-inch flanged service. The supplied listing describes a 2 x 2 x 5.25 arrangement with a 4.875-inch bronze impeller, but manufacturer reference data associates SKU 1EF031LF with a different e613S size and impeller configuration. Verify the nameplate before purchase.

The motor accepts 115 or 208–230 V power and operates within the Series e-60 platform. The supplied data identifies a cast-iron lead-free body, but flow, head, pressure, amp draw, seal material, dimensions, weight, and final pump size were not confirmed. Resolve the configuration difference before selecting the pump from the actual HVAC curve.

Key Features & Benefits

• 3/4 HP Motor: Supports high-flow commercial hydronic circulation when the verified configuration matches.
• Single-Phase Voltage: Accepts 115 or 208–230 V service for flexible electrical planning.
• Series e-60 Platform: Provides a defined product family for commercial HVAC replacement.
• Cast-Iron Body: Provides the supplied casing material for compatible closed-loop service.
• Bronze Impeller: Identifies the listed rotating material for hydronic circulation.
• Pump Size Verification: Helps prevent a flange and port-length mismatch before installation.
• Impeller Verification: Confirms the rotating geometry before curve selection.

Why Choose Bell & Gossett 1EF031LF e613S

The e613S may suit high-flow commercial heating, but the supplied pump size and impeller data conflict with manufacturer reference information. Verification should come first.

• Build: Series e-60 construction, cast-iron body, and bronze impeller are identified in the supplied listing.
• Value: Confirming the actual pump configuration can prevent incorrect piping, wiring, and replacement labor.
• Audience: Suited to commercial HVAC contractors, boiler technicians, facility engineers, and hydronic replacement specialists.

Applications & Use Cases

Use Bell & Gossett 1EF031LF e613S for high-flow commercial hydronic heating only after confirming the exact configuration. The supplied listing identifies a 2-inch flanged arrangement, while manufacturer reference data should verify pump size, dimensions, weight, and port reach. Check valve clearance, motor access, and system resistance before installation.

Warranty & Support

• 3-Year Limited Warranty: Series e-60 maintenance-free pump coverage should be confirmed against current manufacturer terms.
• Request written confirmation of SKU 1EF031LF, model e613S, pump size, horsepower, voltage, impeller, and body construction before ordering.

Do not energize the pump until the nameplate and flange details are confirmed. Fill and purge the loop, inspect the seal and flanges, and monitor vibration and temperature during startup. Purchase the Bell & Gossett 1EF031LF e613S Series e-60 hydronic pump through Mulmotor.com for authentic equipment, applicable warranty support, and model-verification assistance.