Bell & Gossett 179285LF E9010T 1.5AAB Series e90 Pump

Description

Move larger secondary HVAC zones with Bell & Gossett 179285LF E9010T, a 1/2 HP three-phase pump with a 2-inch flanged connection. The 2AAB configuration suits low-head, high-volume applications where larger piping can reduce restriction through the loop. Purge the system before startup, check the flange alignment, and confirm the suction side remains full. A dry or air-bound start can damage the seal and increase vibration.

The motor accepts 208–230/460 V three-phase power and drives a 5-1/4-inch bronze impeller in the Series e-90 platform. The pump carries a stated maximum working pressure of 175 psi, while the supplied information does not list GPM, maximum head, amp draw, self-priming capability, or pressure-switch settings. Size the unit from the actual HVAC curve and verify phase, voltage, and overload protection at the jobsite.

Key Features of Bell & Gossett 179285LF E9010T

• 1/2 HP motor for three-phase HVAC zone pumping.
• 208–230/460 V voltage configuration.
• 5-1/4-inch bronze impeller.
• 2AAB pump size with 2-inch flanged connection.
• Close-coupled in-line construction.
• 175 psi maximum working pressure.
• Series e-90 high-efficiency design.
• SKU 179285LF and model E9010T for replacement matching.

Why the Bell & Gossett 179285LF E9010T Stands Out

The E9010T gives commercial installers a larger 2-inch connection size while retaining a close-coupled in-line arrangement. That combination suits compatible secondary HVAC piping where connection capacity, service access, and available room all need to be checked before installation.

• Build: Bronze impeller construction and flanged connections suit commercial hydronic service; housing material, mounting details, and enclosure rating were not provided.
• Value: Comparing the pump with the system curve before purchase helps prevent throttling, poor flow, excess electrical use, and avoidable call-backs.
• Audience: Suited to HVAC contractors, central-plant technicians, hotel engineers, hospital maintenance teams, and facility operators.

Applications & Use Cases

Use this Bell & Gossett pump for large secondary HVAC zones, chilled-water branches, boiler distribution loops, hotel mechanical rooms, and commercial air-handler circuits. The supplied specifications identify 2-inch flanged connections but do not provide overall dimensions, unit weight, or port-to-port reach. Confirm pipe centerlines, flange clearance, lifting access, and motor service space before ordering.

Warranty & Support

• 1-Year Limited Warranty, subject to the manufacturer’s applicable terms, installation requirements, and authorized-claim procedures.
• Match SKU 179285LF and model E9010T to the existing pump nameplate before replacement.

Remove air from the loop, inspect strainers and flange gaskets, check the mechanical seal area for leakage, and verify phase, voltage, and overload protection. Monitor noise and vibration during commissioning, then keep operating pressure within the stated working limit. Purchase the Bell & Gossett 179285LF E9010T Series e-90 HVAC circulating pump through the store domain associated with this listing for authentic equipment, 1-Year Limited Warranty coverage, and pump assistance.