Bell & Gossett 179266LF E9017S 3AAB Series e90 Pump

Description

Large commercial systems use Bell & Gossett 179266LF E9017S for high-flow HVAC circulation through 3-inch flanged piping. Its 1 HP single-phase motor accepts 115 or 208 to 230 V, while the 5-1/4-inch bronze impeller and 175 PSI working pressure support compatible building loops. Confirm the system curve, flange alignment, motor voltage, and suction conditions before startup.

The Series e-90 E9017S uses a 3AAB pump size with a bronze impeller for large commercial circulation. Its high-flow configuration suits building HVAC systems, but verified data does not include GPM, maximum head, amp draw, RPM, seal material, operating temperature, dimensions, weight, thermal protection, or self-priming capability. Match the pump to the approved hydraulic duty point before installation.

Key Features of Bell & Gossett 179266LF Series e-90 E9017S

• 1 HP motor supports large-scale commercial HVAC and hydronic circulation.
• 115 or 208 to 230 V single-phase operation suits compatible commercial power systems.
• 3AAB pump size supports 3-inch flanged building circulation piping.
• 5-1/4-inch bronze impeller supports the specified E9017S hydraulic configuration.
• 175 PSI maximum working pressure supports compatible commercial hydronic design.
• Series e-90 high-efficiency configuration suits large building circulation systems.
• Flanged connection supports compatible HVAC replacement and piping layouts.
• Flow, head, amperage, RPM, seal, temperature, dimensions, weight, protection, and warranty require confirmation.

Why Choose Bell & Gossett 179266LF Series e-90 E9017S

This Bell & Gossett high-flow HVAC pump combines large flanged piping with bronze impeller construction.

• Build: Bronze hydraulics and 3-inch flanged construction support compatible commercial HVAC circulation.
• Value: Larger piping can reduce header restriction, while correct curve selection helps limit throttling and service interruptions.
• Audience: Commercial HVAC contractors, building engineers, facility managers, hydronic designers, and maintenance teams can specify this model.

Applications & Use Cases

Use the Bell & Gossett 179266LF Series e-90 E9017S for large commercial HVAC, high-flow hydronics, building loops, and compatible 3-inch piping. Physical dimensions, unit weight, and connection reach were not supplied, so verify flange spacing, valve clearance, motor access, wiring position, lifting room, and structural support before installation.

Warranty & Support

• Warranty: Bell & Gossett general product terms provide one year from installation or 18 months from product date code, whichever occurs first.
• Verify voltage, purge trapped air, inspect the bronze impeller and seal, confirm flange alignment, and check pressure during commissioning.

Flush system strainers, monitor the pump body for leakage, and inspect the impeller and flanges during scheduled service. Purchase the Bell & Gossett 179266LF Series e-90 E9017S high-flow HVAC pump from Mulmotor.com for authentic equipment, applicable factory warranty protection, and pump support.