Bell & Gossett 102222 LD3 Pump Cast Iron Body 1/4 HP

Description

Match pump-end power to Domestic Pump DM1119, a 3 HP, 3500 RPM motor intended for compatible high-head Centriflo packaged units. This is a motor-only component, not a complete pump, so the existing pump end, coupling, shaft, and frame interface must be checked before purchase. Its special 200 V three-phase configuration also requires direct field verification before wiring.

The two-pole motor uses an open drip proof enclosure and a JM footless frame for specific pump-end mating. The supplied information identifies 3 HP output, 3500 RPM speed, and 200 V three-phase power, but amp draw, shaft diameter, rotation, frame dimensions, service factor, and mounting details were not stated. Compare the motor with the original Centriflo assembly before installation.

Key Features & Benefits

• 3 HP Motor: Provides the listed power rating for compatible high-head packaged pump units.
• 3500 RPM Speed: Matches the specified two-pole operating speed for high-speed pump-end service.
• 200 V Three-Phase: Requires dedicated voltage verification before connection to avoid electrical mismatch.
• ODP Enclosure: Identifies the open drip proof motor style for proper equipment placement.
• JM Footless Frame: Supports specific pump-end mating where the original frame interface matches.
• Motor-Only Configuration: Helps buyers separate the replacement motor from the existing pump-end assembly.
• Centriflo Replacement Use: Directs selection toward compatible high-head packaged-unit service.

Why Choose Domestic Pump DM1119

The DM1119 is intended for targeted motor replacement, not whole-pump replacement. Its value depends on accurate matching of horsepower, speed, voltage, frame, shaft, rotation, and pump-end interface with the original Centriflo package.

• Build: ODP enclosure, JM footless frame, and two-pole 3500 RPM construction provide defined motor details.
• Value: Replacing only the motor may reduce equipment cost and piping disruption when the pump end remains serviceable.
• Audience: Designed for industrial pump technicians, packaged-unit service contractors, facility engineers, and maintenance buyers.

Applications & Use Cases

Use Domestic Pump DM1119 as a replacement motor for compatible high-head Centriflo packaged units. The supplied specifications do not include frame dimensions, shaft measurements, weight, rotation, or mounting-hole details, so verify the pump-end interface, coupling fit, shaft alignment, electrical clearance, and ODP enclosure location before purchase.

Warranty & Support

• Warranty Terms Require Confirmation: Verify duration, coverage, registration, exclusions, and authorized service requirements with the seller.
• Confirm DM1119, 3 HP, 3500 RPM, 200 V three-phase, ODP, and JM footless-frame details before ordering.

Disconnect and lock out power, document motor rotation, inspect the coupling, measure shaft alignment, and verify the 200 V three-phase supply before startup. Monitor vibration, bearing noise, temperature, and pump-end performance after installation. Purchase the Domestic Pump DM1119 3 HP replacement motor through Mulmotor.com for authentic equipment, applicable warranty support, and pump-matching assistance.