Bell & Gossett 102206 PR Pump Cast Iron Body 1/6 HP

Description

Residential boiler systems use Bell & Gossett 102206 PR for moderate-head hydronic circulation and domestic heating applications. Its 1/6 HP, 115 V single-phase motor operates at 1725 RPM through a three-piece oil-lubricated design, while the alloy steel shaft and bronze sleeve support the rotating assembly. Prime the loop, verify lubrication, and confirm the approximate 12-foot head requirement before startup.

The Series PR pump uses a cast iron body, alloy steel shaft with bronze sleeve, and three-piece oil-lubricated construction. Its approximate 12-foot maximum head suits compatible residential hydronic systems, but verified data does not include GPM, amp draw, impeller material, seal type, connection size, operating temperature, dimensions, weight, thermal protection, or self-priming capability. Match the circulator to the boiler-loop curve and maintain adequate fluid level.

Key Features of Bell & Gossett 102206 PR

• 1/6 HP motor supports residential hydronic systems and domestic boiler circulation.
• 115 V single-phase operation suits compatible residential heating electrical circuits.
• 1725 RPM operation supports the specified Series PR pump configuration.
• Cast iron body provides a rigid housing for residential heating systems.
• Alloy steel shaft with bronze sleeve supports the rotating pump assembly.
• Three-piece oil-lubricated construction provides serviceable pump assembly access.
• Approximately 12-foot head suits compatible moderate-head hydronic circulation systems.
• Flow, amperage, impeller, seal, connections, temperature, dimensions, weight, protection, and warranty require confirmation.

Why Choose Bell & Gossett 102206 PR

This Bell & Gossett residential heating pump combines a serviceable oil-lubricated design with a cast iron hydronic body.

• Build: Cast iron, alloy steel, bronze sleeve, and three-piece construction support compatible residential boiler systems.
• Value: Serviceable lubrication and compact configuration can reduce replacement complexity and routine maintenance disruption.
• Audience: Residential HVAC contractors, boiler technicians, hydronic installers, heating service teams, and property maintenance professionals can specify this model.

Applications & Use Cases

Use the Bell & Gossett 102206 PR for residential hydronic systems, domestic boiler circulation, heating zones, and moderate-head water movement. Physical dimensions, unit weight, and connection reach were not supplied, so verify pipe spacing, valve access, lubrication clearance, motor wiring, and service room before installation.

Warranty & Support

• Warranty: Bell & Gossett general product terms provide one year from installation or 18 months from product date code, whichever occurs first.
• Check oil level, purge trapped air, inspect the shaft sleeve and seal, and verify 115 V operation during commissioning.

Clean strainers, monitor the cast iron body for leakage, and maintain lubrication according to approved instructions during scheduled service. Purchase the Bell & Gossett 102206 PR residential hydronic pump from Mulmotor.com for authentic equipment, applicable factory warranty protection, and pump support.