Armstrong E33.2B Series 3 Inch Bronze Circulating Pump
To run large-scale potable booster loops, the high-efficiency Armstrong 182212-676 uses a 120V dry rotor motor to throw 110 GPM safely through 3-inch lines.
- 110 GPM flow moves water fast
- 43 feet head overcomes system drag
- Lead-free bronze body meets sanitary codes
- Stainless steel shaft resists loop corrosion
- Permanently lubricated bearings eliminate oiling schedules
Description
Move larger domestic hot-water volumes with Armstrong 182212-676 E33.2B 3-inch, a lead-free bronze ARMflo circulator for commercial potable-water booster systems. Its 3-inch flanged connection, 110 GPM maximum flow, and 43 feet maximum head suit large-scale hot-water plants where connection capacity and system resistance must be reviewed together. Confirm the actual operating point and pipe layout before installation.
The dry-rot high-efficiency motor operates on 120 V single-phase power and drives the pump through a bronze body and stainless-steel shaft. The supplied data does not state motor power, amp draw, RPM, seal material, dimensions, weight, or bearing arrangement. Verify the manufacturer’s submittal, flange spacing, valve clearance, water temperature, and service access before startup.
Key Features & Benefits
- 110 GPM Maximum Flow: Supports large commercial potable-water and domestic hot-water systems.
- 43 Feet Maximum Head: Provides a useful reference for higher-resistance water loops.
- 3-Inch Flanged Connection: Accommodates larger commercial piping and header layouts.
- 120 V Single-Phase: Fits compatible service panels for straightforward electrical planning.
- Lead-Free Bronze Body: Provides the specified wetted material for potable-water service.
- Stainless-Steel Shaft: Supplies the listed shaft material for the rotating assembly.
- Dry-Rotor Motor: Provides the specified motor arrangement for commercial circulation.
- NSF-372 and AB1953: Support the stated potable-water compliance requirements.
- Large-Loop Configuration: Directs selection toward commercial hot-water booster applications.
Why Choose Armstrong 182212-676 E33.2B 3-Inch
The 3-inch E33.2B gives commercial installers larger flanged connections with lead-free bronze construction and higher-head circulation for large domestic hot-water systems.
- Build: Bronze body, stainless-steel shaft, dry-rot motor, and 3-inch flanged layout define the supplied pump.
- Value: The connection size and listed hydraulic ratings help contractors plan large-loop replacements.
- Audience: Suited to plumbing contractors, hospital engineers, hotel maintenance teams, and commercial DHW specialists.
Applications & Use Cases
Use Armstrong 182212-676 E33.2B 3-inch for large potable-water systems, commercial hot-water booster loops, and compatible 3-inch flanged piping. The supplied data does not provide overall dimensions, unit weight, or port-to-port reach, so verify flange spacing, lifting access, valve clearance, pipe support, water temperature, and service space before installation.
Warranty & Support
- Warranty Terms Require Confirmation: Verify duration, coverage, registration, exclusions, and authorized service requirements with Armstrong or the seller.
- Match SKU 182212-676, E33.2B 3-inch model, bronze body, 120 V supply, flow, head, and flange size before ordering.
Flush the line, purge air, verify the 120 V supply, inspect the seal and flange areas, and monitor flow, vibration, temperature, and leakage during commissioning. Purchase the Armstrong 182212-676 E33.2B 3-inch ARMflo bronze potable-water circulator through Mulmotor.com for authentic equipment, applicable warranty support, and pump assistance.
Armstrong 182212-676 E33.2B 3" Bronze Circulating Pump Specs
| Technical Parameter | Official Specification |
|---|---|
| Brand & Model | Armstrong ARMflo (E33.2B - 3") |
| Full SKU/Model | 182212-676 |
| Motor Design | Dry Rotor (High Efficiency) |
| Electrical Phase | Single-Phase (1-PH) |
| Voltage Configuration | 120 V |
| Body Material | Bronze (Lead-Free Compliant) |
| Connection Size | 3 inch (Flanged) |
| Max Head | 43 ft (13.1 m) |
| Max Flow Rate | 110 GPM (416 LPM) |
| Compliance | NSF-372 / AB1953 (Safe for Drinking Water) |
| Shaft Material | Stainless Steel |
| Application Information | Large Scale Potable Water Systems; Commercial Hot Water Booster |












Reviews
There are no reviews yet.