Armstrong 410133-341 Circulating Pump 702T Bronze Impeller

Description

Corrosive industrial loops use Armstrong 410133-341 702T for three-phase heating and circulation where a bronze impeller suits the fluid conditions. Its 1/12 HP motor accepts 208 to 230 or 460 V, while the cast iron body, bronze sleeve, and oil-lubricated sleeve bearings support fixed commercial installations. Confirm water chemistry, phase rotation, bearing lubrication, and the system curve before startup.

The Armstrong Series 700 702T Bronze Fitted uses a cast iron body with bronze hydraulic components and oil-lubricated sleeve-bearing construction. Its three-phase motor supports industrial power systems, while the bronze sleeve protects the shaft interface. Verified data does not include GPM, maximum head, amp draw, RPM, seal material, connection size, operating temperature, dimensions, weight, thermal protection, or self-priming capability, so confirm complete pump documentation before installation.

Key Features of Armstrong 410133-341 702T Bronze Impeller

• 1/12 HP motor supports three-phase industrial heating and closed-loop circulation.
• 208 to 230 or 460 V operation suits compatible commercial power systems.
• Cast iron body provides a rigid housing for fixed hydronic installations.
• Bronze non-ferrous impeller supports compatible corrosive-potential secondary loops.
• Bronze sleeve protects the shaft interface during pump operation.
• Oil-lubricated sleeve bearings require periodic maintenance according to approved instructions.
• Series 700 configuration supports industrial heating and commercial HVAC circulation.
• Flow, head, amperage, RPM, seal, connections, temperature, dimensions, weight, protection, and warranty require confirmation.

Why Choose Armstrong 410133-341 702T Bronze Impeller

This Armstrong bronze-fitted circulator combines three-phase operation with corrosion-conscious hydraulic components for industrial closed-loop service.

• Build: Cast iron, bronze impeller, bronze sleeve, and oil-lubricated bearings support compatible industrial circulation.
• Value: Bronze hydraulic components can support selected corrosive-potential loops when fluid chemistry and maintenance requirements are controlled.
• Audience: Industrial HVAC contractors, process-water technicians, boiler installers, facility engineers, and commercial maintenance teams can specify this model.

Applications & Use Cases

Use the Armstrong 410133-341 702T for industrial closed loops, three-phase heating, commercial HVAC circulation, and secondary hydronic systems. Physical dimensions, unit weight, and connection reach were not supplied, so verify pipe spacing, valve clearance, oiling access, motor wiring, lifting room, and structural support before installation.

Warranty & Support

• Warranty: Armstrong USA general terms provide 12 months from installation, not exceeding 18 months from shipment, for applicable non-E.2 products.
• Confirm water chemistry, purge air, lubricate bearings, inspect the bronze sleeve, and verify phase rotation during commissioning.

Clean strainers, monitor the cast iron body for leakage, and inspect the bronze impeller and bearing assembly during scheduled service. Purchase the Armstrong 410133-341 702T bronze impeller circulating pump from Mulmotor.com for authentic equipment, applicable factory warranty protection, and pump support.