Armstrong 182202-658 E8.2B Bronze Circulating Pump

Description

Potable hot-water loops use Armstrong 182202-658 E8.2B to circulate up to 24 GPM against a maximum head of 28 feet. Its 120 V single-phase dry-rot PSC motor, lead-free bronze body, and stainless steel, carbon, and ceramic mechanical seal suit residential potable-water systems and hot-water recirculation loops. Purge trapped air, verify water chemistry, and keep the pump flooded before startup.

The Armstrong E8.2B carries a 150 PSI maximum pressure rating and uses a lead-free bronze body for open-loop potable-water service. Its stainless steel shaft supports the rotating assembly, while the mechanical seal combines stainless steel, carbon, and ceramic components. Verified data does not include amp draw, RPM, connection size, operating temperature, dimensions, or thermal protection, so confirm the complete electrical and hydraulic requirements before installation.

Key Features of Armstrong 182202-658 E8.2B

• 24 GPM maximum flow supports residential potable-water and hot-water recirculation loops.
• 28-foot maximum head suits compatible residential and light-commercial hydronic systems.
• 120 V single-phase PSC motor simplifies connection to compatible branch circuits.
• Dry-rotor construction separates motor components from the circulating potable water.
• Lead-free bronze body supports open-loop potable-water circulation requirements.
• Stainless steel shaft supports the rotating assembly during recirculation service.
• Stainless steel, carbon, and ceramic seal construction helps contain circulating water.
• 150 PSI maximum pressure supports approved system operating conditions.
• Amperage, RPM, connections, temperature, dimensions, weight, thermal protection, and warranty require confirmation.

Why the Armstrong 182202-658 E8.2B Stands Out

This Armstrong bronze circulating pump combines potable-water materials, dry-rot motor design, and defined hydraulic performance for recirculation systems.

• Build: Lead-free bronze, stainless steel, and ceramic seal materials support potable-water service when chemistry and temperature remain compatible.
• Value: Correct flow and head matching can reduce poor fixture circulation, excess runtime, seal wear, and unnecessary service visits.
• Audience: Plumbing contractors, residential HVAC technicians, hot-water installers, solar-heating teams, and facility maintenance professionals can specify this pump.

Applications & Use Cases

Use the Armstrong 182202-658 E8.2B for residential potable-water circulation, domestic hot-water return loops, small hydronic systems, and compatible commercial recirculation. Physical dimensions and connection reach were not supplied, while the listed weight is approximately 13 pounds, so verify pipe spacing, valve clearance, wiring access, and service room before installation.

Warranty & Support

• Warranty: Armstrong USA terms provide a 30-month circulator warranty from the date of manufacture, subject to stated conditions.
• Confirm potable-water compatibility, purge air, inspect the seal, verify pressure, and check electrical operation during commissioning.

Clean the system strainer, monitor the bronze body for leakage, confirm water temperature, and inspect the seal during scheduled service. Purchase the Armstrong 182202-658 E8.2B bronze potable-water circulating pump from [store domain] for authentic equipment, applicable factory warranty protection, and pump support.