Armstrong 174035MF-143 H-41 AB Bronze Centrifugal Pump

Description

Commercial potable-water systems use Armstrong 174035MF-143 H-41 AB for hot-water recirculation and compatible domestic-water service. Its 1/6 HP single-phase motor operates at 115 V, while the all-bronze lead-free body, stainless steel shaft, and Viton-ceramic mechanical seal support potable-water applications. Confirm the approximate 30-foot head, AB1953 certification, system curve, and water chemistry before startup.

The Armstrong Series 1050 H-41 AB uses a maintenance-free three-piece design with all-bronze construction and permanently lubricated components. Its approximate head value guides system selection, while verified data does not include GPM, amp draw, RPM, connection size, operating temperature, dimensions, weight, thermal protection, or self-priming capability. Match the pump to the domestic hot-water duty point before installation.

Key Features of Armstrong 174035MF-143 H-41 AB

• 1/6 HP motor supports commercial potable-water and hot-water recirculation systems.
• 115 V single-phase operation suits compatible domestic-water electrical circuits.
• Approximately 30 feet of head guides potable-water system selection.
• All-bronze lead-free construction supports specified potable-water applications.
• Stainless steel shaft supports the rotating pump assembly during circulation.
• Viton and ceramic seal materials support approved hot-water service.
• Maintenance-free three-piece design reduces routine bearing service requirements.
• AB1953 certification supports lead-conscious potable-water installation requirements.
• Flow, amperage, RPM, connections, temperature, dimensions, weight, protection, and warranty require confirmation.

Why Choose Armstrong 174035MF-143 H-41 AB

This Armstrong all-bronze circulator combines potable-water materials with maintenance-free construction for domestic hot-water systems.

• Build: Lead-free bronze, stainless steel shaft, and Viton-ceramic sealing support compatible potable-water service.
• Value: Maintenance-free construction can reduce routine service work across commercial hot-water recirculation systems.
• Audience: Plumbing contractors, domestic-water installers, hotel maintenance teams, boiler technicians, and facility engineers can specify this model.

Applications & Use Cases

Use the Armstrong 174035MF-143 H-41 AB for commercial potable-water systems, hot-water recirculation, domestic-water loops, and compatible solar-heating applications. Physical dimensions, unit weight, and connection reach were not supplied, so verify pipe spacing, valve clearance, motor access, wiring position, lifting room, and service support before installation.

Warranty & Support

• Warranty: Armstrong USA general terms provide 12 months from installation, not exceeding 18 months from shipment, for applicable non-E.2 products.
• Confirm potable-water compliance, purge trapped air, inspect the Viton-ceramic seal, verify shaft alignment, and check system flow during commissioning.

Flush domestic-water strainers, monitor the bronze body for leakage, and inspect the shaft and seal during scheduled maintenance. Purchase the Armstrong 174035MF-143 H-41 AB potable-water circulation pump from Mulmotor.com for authentic equipment, applicable factory warranty protection, and pump support.