VETUS VD6.210 Marine Diesel Engine
$7,560.00
In Stock
VETUS VD6.210 Specs
| Brand | VETUS |
| Full Model Code / Configuration | VD6.210 (Vertical 4-cycle water-cooled common-rail diesel engine) |
| Country of Origin | Netherlands |
| Engine Series / Family | D-Line (Deutz base block architecture) |
| Engine Type / Cylinder Block | Inline-6, 4-Stroke |
| Displacement | 6.057 Liters / 6,057 cc |
| Rated Horsepower | 210 HP (154.0 kW) @ 2400 RPM |
| Maximum Torque | 740 Nm @ 1400–1600 RPM |
| Rated Engine Speed / Redline RPM | 2400 RPM |
| Aspiration & Induction | Turbocharged, Charge Air Cooler (Aftercooled) |
| Fuel System / Injection | Common Rail System (Direct Injection, Electronically Controlled Bosch Setup) |
| Bore x Stroke | 101 mm x 126 mm |
| Compression Ratio | 18.0:1 |
| Electrical System Voltage | 12V (Standard / 24V optional alternative setup) |
| Alternator Output | 160 Amps (Standard 12V configuration) |
| Cooling System Type | Fresh Water Heat Exchanger (Closed-loop layout with high-capacity VETUS cast-aluminum exchanger) |
| Coolant Capacity | 21.0 Liters |
| Exhaust System / Configuration | Wet Exhaust (Water-injected rubber or plastic mixing elbow setup) |
| Emission Compliance | EU RCD 2 (2013/53/EU), BSO II, EPA Tier 3 compliant |
| Lubrication System Capacity | 15.5 Liters (Total dynamic oil pan capacity) |
| Recommended Oil Grade | SAE 15W-40 / 10W-40, API CI-4 / CK-4 |
| Fuel Type / Requirement | Ultra-Low Sulfur Diesel (ULSD, EN 590 / ASTM D975) |
| Fuel Consumption at Cruising Speed | 29.5 Liters/hour @ 2000 RPM (At continuous semi-displacement load) |
| Compatible Marine Gear / Transmission | ZF63A, ZF68A, TM93A, TM345A |
| Available Gear Ratios | 1.51:1, 2.04:1, 2.52:1 (ZF63A) / 2.00:1, 2.40:1 (TM93A) |
| Drive Type Compatibility | Shaft Drive / V-Drive |
| Dry Weight - Engine Only | 595 kg |
| Dry Weight - with Transmission | 639 kg (with ZF63A) |
| Dimensions - L x W x H | 1235 mm x 685 mm x 795 mm (Engine dimension footprints) |
| Governor / Engine Control Unit | Electronic Control Unit (ECU Engine Management System maps) |
| Control System Interface | CAN-bus SAE J1939 protocol, NMEA 2000 multi-instrumentation links |
| Starting System | Electric starter motor 3.0 kW |
| Flywheel & Housing Size | SAE No. 3 |
| Standard Warranty | 5 Years (Recreational Limited Warranty protection setup) |
| Application | Heavy displacement trawlers (45–55 feet), displacement motor cruisers, inland commercial barges, and passenger tour boats. |
You must be logged in to post a review.
Reviews
There are no reviews yet.