VETUS VF4.145 Marine Diesel Engine
$5,124.00
In Stock
VETUS VF4.145 Specs
| Brand | VETUS |
| Full Model Code / Configuration | VF4.145 (Vertical high-speed 4-cycle common-rail diesel engine) |
| Country of Origin | Netherlands |
| Engine Series / Family | F-Line (FPT/VM Motori base engine architecture) |
| Engine Type / Cylinder Block | Inline-4, 4-Stroke (DOHC, 16 valves) |
| Displacement | 1.91 Liters / 1,910 cc |
| Rated Horsepower | 145 HP (107.0 kW) @ 4000 RPM |
| Maximum Torque | 301 Nm @ 2400 RPM |
| Rated Engine Speed / Redline RPM | 4000 RPM |
| Aspiration & Induction | Turbocharged, Charge Air Cooler (Intercooled / fixed-geometry options) |
| Fuel System / Injection | Common Rail System (Direct Injection mapping matrix) |
| Bore x Stroke | 82 mm x 90.4 mm |
| Compression Ratio | 18.0:1 |
| Electrical System Voltage | 12V |
| Alternator Output | 115 Amps |
| Cooling System Type | Fresh Water Heat Exchanger (Closed-loop design thermal setup) |
| Coolant Capacity | 7.5 Liters |
| Exhaust System / Configuration | Wet Exhaust (Water-cooled cast manifold array) |
| Emission Compliance | EU RCD 2 (2013/53/EU), EPA Tier 3 footprint standards |
| Lubrication System Capacity | 5.8 Liters (Total engine pan parameter) |
| Recommended Oil Grade | SAE 10W-40 / 15W-40, API CD/CE/CF/CI-4 |
| Fuel Type / Requirement | Diesel Fuel / Ultra-Low Sulfur Diesel (EN 590) |
| Fuel Consumption at Cruising Speed | 17.2 Liters/hour @ 3000 RPM (Cruising load parameters) |
| Compatible Marine Gear / Transmission | ZF45A, ZF25, TM345A |
| Available Gear Ratios | 1.51:1, 2.03:1, 2.47:1 (ZF45A) |
| Drive Type Compatibility | Shaft Drive / V-Drive |
| Dry Weight - Engine Only | 246 kg |
| Dry Weight - with Transmission | 279 kg (with ZF45A) |
| Dimensions - L x W x H | 774 mm x 630 mm x 695 mm (Engine dimension footprints) |
| Governor / Engine Control Unit | Electronic Control Unit (ECU engine power map controllers) |
| Control System Interface | CAN-bus SAE J1939 interface layout, NMEA 2000 link options |
| Starting System | Electric starter motor 2.0 kW |
| Flywheel & Housing Size | SAE No. 4 (Standard flange arrangements) |
| Standard Warranty | 5 Years (Recreational Limited Warranty systems) |
| Application | Semi-displacement motor cruisers (30–35 feet), fast displacement hulls, luxury boat tenders, and planing weekend hulls. |
You must be logged in to post a review.
Reviews
There are no reviews yet.