FNM 30HPE 270 Inboard Marine Engine
$12,383.00
In Stock
FNM 30HPE 270 Specs
| Brand | FNM |
| Full Model Code / Configuration | 30HPE 270 (Vertical high-speed 4-cycle common-rail diesel engine) |
| Country of Origin | Italy |
| Engine Series / Family | HPE Series (FCA/Jeep base block platform configuration) |
| Engine Type / Cylinder Block | Inline-4, 4-Stroke (Dual overhead camshafts, 16 valves) |
| Displacement | 2.998 Liters / 2,998 cc |
| Rated Horsepower | 270 HP (199.0 kW) @ 4000 RPM |
| Maximum Torque | 540 Nm @ 2400–2600 RPM |
| Rated Engine Speed / Redline RPM | 4200 RPM |
| Aspiration & Induction | Variable Geometry Turbocharger (VGT), Charge Air Cooler (Water-to-air intercooler mapping) |
| Fuel System / Injection | Common Rail System (Direct Injection, 2000 bar Multijet electronic architecture) |
| Bore x Stroke | 95.8 mm x 104 mm |
| Compression Ratio | 17.5:1 |
| Electrical System Voltage | 12V |
| Alternator Output | 140 Amps |
| Cooling System Type | Fresh Water Heat Exchanger (Closed-circuit setup with integrated water-cooled exhaust manifold assembly) |
| Coolant Capacity | 8.5 Liters |
| Exhaust System / Configuration | Wet Exhaust (Water-injected stainless steel mixing riser assembly setup) |
| Emission Compliance | EU RCD 2 (2013/53/EU), US EPA Tier 3 compliant footprint |
| Lubrication System Capacity | 7.2 Liters (Total diagnostic internal sump system parameter) |
| Recommended Oil Grade | SAE 5W-30 / 5W-40, API CI-4 / CK-4 (Full synthetic low-ash specification profiles) |
| Fuel Type / Requirement | Ultra-Low Sulfur Diesel (ULSD, EN 590 / ASTM D975) |
| Fuel Consumption at Cruising Speed | 29.1 Liters/hour @ 3200 RPM (High-efficiency planing load benchmarks) |
| Compatible Marine Gear / Transmission | ZF63A, ZF63, TM345A, Bravo One/Three (Sterndrive configuration adaptions) |
| Available Gear Ratios | 1.51:1, 2.04:1 (ZF63A) / 1.50:1, 2.00:1 (Bravo Sterndrive arrays) |
| Drive Type Compatibility | Shaft Drive / V-Drive / Sterndrive option variants |
| Dry Weight - Engine Only | 335 kg |
| Dry Weight - with Transmission | 379 kg (with ZF63A transmission assembly kit arrangement) |
| Dimensions - L x W x H | 789 mm x 751 mm x 788 mm (Compact marine packaging envelopes) |
| Governor / Engine Control Unit | Electronic Control Unit (Proprietary FNM ECU system calibration mappings) |
| Control System Interface | CAN-bus SAE J1939 protocols, NMEA 2000 integration gateway arrays |
| Starting System | Electric starter motor 2.5 kW |
| Flywheel & Housing Size | SAE No. 4 (High-speed custom conversion plate arrays) |
| Standard Warranty | 2 Years (Recreational limited warranty protections with optional commercial limits) |
| Application | Fast planing hull motor boats (30–38 feet), rapid offshore sportfishers, sport cruisers, luxury cabin yachts, and rapid utility interceptor craft. |
FNM 30HPE 270 Engine Included:
- 1x Premium 30HPE 270 Marine Diesel Core
- 1x Electronic Common Rail Direct Injection System
- 1x Water Cooled Intercooler Turbocharger Piping System
- 1x Marine Grade Corrosion Resistant Heat Exchanger
- 1x Engine Protection ECU System Management Monitoring
- 1x High Output Alternator Battery Charging System
- 1x Official FNM Marine Engines Limited Warranty
- 1x Technical Installation Workshop Manual Documentation
You must be logged in to post a review.
Reviews
There are no reviews yet.