Craftsman Marine CM2.16 Diesel Engine
$1,995.00
In Stock
Used Craftsman Marine CM2.16 Diesel Engine Specs
| Brand | Craftsman Marine |
| Full Model Code | CM2.16 (Mitsubishi Base Platform) |
| Country of Origin | Netherlands / Japan |
| Engine Family/Series | Craftsman Ultra-Compact Auxiliary Line |
| Engine Type & Configuration | Inline 2-Cylinder, 4-Stroke, Lightweight Marine Diesel |
| Aspiration & Induction System | Naturally Aspirated |
| Displacement | 0.635 Liters / 635 cc |
| Bore x Stroke | 76.0 mm x 70.0 mm |
| Cylinder Count & Valves per Cylinder | 2-Cylinder, 2-Valves per Cylinder (4 Valves Total) |
| Compression Ratio | 23.0:1 |
| Rated Power / Horsepower | 16 HP (11.8 kW) @ 3600 RPM |
| Maximum Engine Speed / Rated RPM | 3600 RPM |
| Maximum Torque | 36 Nm @ 2400 RPM |
| Fuel System & Injection Type] | Mechanical Miniature Pump Setup, Indirect Injection Swirl Pre-Chamber |
| Governor Type | Mechanical All-Speed Centrifugal Governor |
| Electrical System Voltage & Alternator Output | 12V System, 70 Amp Marine Grade Alternator |
| Starting System | 12V Electric Starter Motor with Preheat Glow System |
| Cooling System Type | Freshwater Cooled through Integral Cast-Aluminum Heat Exchanger Shell |
| Lubricating Oil Capacity / Oil Pan Capacity | 3.0 Liters |
| Exhaust Diameter / Exhaust System Type | 40 mm / Wet Water-Injected Rubber-Hose Friendly Mixing Elbow |
| Flywheel & Flywheel Housing Size | Fitted for Compact Mechanical Transmissions (ZF Hurth / Technodrive TM345 arrays) |
| Dry Weight without Marine Gear | 89 kg (196 lbs) |
| Dimensions L x W x H | 527 mm x 421 mm x 522 mm |
| Emission Certifications & Duty Rating | EU RCD 2, EPA Tier 3 Compliant / Light Recreational Auxiliary Duty |
| Application | Pocket cruising yachts, small sailing daysailers, traditional wooden boats, and light displacement canal craft (Typical hull lengths 20-27 feet, adaptable to conventional shaft installations or compact saildrives). |
Craftsman CM2.16 Engine Included:
- New Compact Auxiliary Marine Engine Unit
- Integral Cast Aluminum Heat Exchanger Shell
- Wet Water Injected Marine Mixing Elbow
- Marine Grade 70 Amp Alternator Unit
- Electric Starter Motor and Preheat System
- Mechanical All Speed Centrifugal Governor System
- Official Craftsman Marine Limited Warranty Card
- Technical Engine Manual and Workshop Documentation
You must be logged in to post a review.
Reviews
There are no reviews yet.